Velleman CAMCOLD/CK Manual De Instrucciones

CAMCOLD/CK – CONTROLLER KEYBOARD FOR DOME CAMERA
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on this unit or the package indicates that disposal of this unit after its lifecycle could harm the
environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be brought to a specialized
company for recycling.
This unit should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities
Thank you for buying the CAMCOLD/CK! If the device was damaged in transit, contact your dealer.
2. Features
• Can control up to 99 cameras
• Ability to control 99 normal scanner heads, 1 scanner head, low speed scanner head (less than 24°/sec),
variable speed scanner head
• Joystick makes for easy manipulation
• Each scanner head can have 64 pre-programmed positions
• Delay time can be set between 1~60 sec
• Presets: only available on dome cameras disposing of the preset function
• Clearly legible LCD display
• RS-485 interface
• Normal scanner head / control electronic lens and scanner head via decoder (each decoder has 2 ON/OFF
switches)
• Normal recording/lens all in one scanner head
• Low speed scanner head can have 64 pre-positions, slow speed control (<24°/sec)
• High speed, variable speed scanner head can have 64 preset points, variable speed control
3. Specifications
• Power: adapter 9-12VDC / 400mA (not included)
• Control protocol: RS-485
• Transfer speed: 9600 bit/sec
• Dimensions: 265 x 175 x 80mm
• Weight: 0.95kg
4. Connection
1 (grey), 2 (white) – DC 9V-12V
3 (black), 4 (red) – RS485 control A
5 (green), 6 (yellow) – RS485 control B
7 (blue), 8 (brown) - Ground
CAMCOLD/CK_v2
1 VELLEMAN