Tabla de contenido
6. Operation (Cartridge)
6.1 Cartridge preparation
• Remove the cap by turning it clockwise.
• Insert the white fiber wick straight into the hole, and then place the cartridge into the device.
* In case of leakage, wipe clean with a tissue.
6.2 Cartridge replacement
• Open the cartridge cover on the rear of the device and then carefully push the cartridge into the device.
• Close the cartridge cover after successfully placing the cartridge inside the device.
* If the warning light is still on, check if the cartridge is properly placed.
Then, close the cartridge cover carefully.
* Insert the cartridge while the device is on, which is indicated by a buzzer sound and
the operation mode light.
- 12 -
Tabla de contenido
