Tabla de contenido
5. Operation (Device)
5.1 Operating Mode
• Place the device on a table using a stand or on the wall with a mounted bracket.
• Insert the adapter jack into the DC power input (socket) on the rear of the device. Then, insert the adapter
plug into the power outlet.
• Press
the operating button to turn the device on. The device will start working when the operating mode
lights up and after a short buzzer sound.
• Air quality status sign will light up from red -> orange -> blue for five (5) minutes. Orange light can display
up to 30 minutes until the device reaches its normal condition indicated by the blue light.
• The device will automatically turn off if the cartridge is missing is not installed properly.
• If the warning light continuously blinks even after following the above conditions, contact the nearest
service center or local distributor for further instructions.
5.2 Night Mode
• Press
the night mode button to switch the device to night mode. In night mode, light is turned off and
noise is reduced because the fan speed is lower.
- 11 -
Tabla de contenido
