Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
Connecting headphones
Figure 11
Control pod connectors
Connecting an audio device
To connect headphones, plug the headphones cord into the 3.5-mm stereo headphones
jack on the side of the control pod (Figure 11).
• Plugging in headphones automatically mutes the system speakers.
• After disconnecting headphones, touch the mode switch to hear sound from the speakers
again.
• To adjust the volume level, use the volume control ring on the control pod.
Headphones output jack
To connect an audio device such as a CD/MP3 player, plug the audio cable from the
device into the 3.5-mm stereo input jack on the control pod.
To adjust the volume level, turn up the volume on the audio device and use the volume
control ring on the control pod.
Note: When listening to a connected audio device, alerts and sounds from your computer are
mixed with the sound from the audio device. You may need to adjust the volume control ring and
the volume levels in your computer and the connected device to hear both sources at your
preferred levels.
C
O
ONNECTING
Mode switch
Audio input jack
THER DEVICES
15
Capítulos
Tabla de contenido
