Programming Tv/Vcr Combo Control - COX M7810A Guía Del Usario

4. Aim the remote control at the device and press
POWER once. The device should turn off. If it
does not, repeat steps 2–3, trying each code for
your brand until you find one that works. If it
still does not work, try searching for the code
(see Searching For Your Code on page 11).
NOTE: If the device does not have a POWER key,
press the
5. Repeat steps 1–4 for each device you want the
the remote control to control. For future refer-
ence, write down each working device code in
the following boxes:
AUX
AUX Device ____________________
VCR
TV
CABLE

PROGRAMMING TV/VCR COMBO CONTROL

If you own a TV/VCR Combo, perform the following
instructions to control this device:
1. Turn on your TV/VCR Combo and insert a
video cassette.
2. On the remote control, press DVD once.
Press and hold SETUP until the DVD key
blinks twice, then release SETUP.
3. Use the setup codes for TV/VCR combos on
page 40 to locate the brand name and then enter
the first four-digit code for your TV/VCR
Combo. If you perform this procedure correctly,
the DVD key will blink twice.
NOTE: If the
entering the code's last digit, then repeat steps 2
through 3 and try entering the same code again.
(Play) key.
DVD
key did not blink twice after
10