Replacing The Battery; Parts And Accessories - Shark ION ROBOT RV750 Serie Guía Del Proprietario

MAINTENANCE

REPLACING THE BATTERY

To remove the battery, turn the unit over and
unscrew the battery cover with a Phillips-head
screwdriver.
NOTE: This appliance contains batteries that are only replaceable by skilled persons.

PARTS AND ACCESSORIES

Filter Side Brushes
1172FK870 1171FK870
Multi-Surface Brushroll Kit Dust Bin
1180FK750 1178FTR700
NOTE: To order replacement parts and filters, visit sharkaccessories.com.
sharkc le a n.com
Unplug the old battery from its connector, then
plug in the new battery. Replace battery cover and
screw it back into place. See Battery Removal and
Disposal on back cover.
Battery
RVBAT850
BotBoundary® Kit
RVBBK700
MAINTENANCE
TROUBLESHOOTING
If any error lights are illuminated or flashing on your Shark ION Robot®, see the error code chart
below:
ERROR CODE
Power may be turned off or battery may need charging. Turn power switch
ALL LED LIGHTS are off
to On position. If no response, place robot on dock to charge.
Suction motor failure. Remove blockages and clean filters. Remove dust bin
CLEAN (RED) + ! flashing together
and make sure nothing is blocking suction.
Robot may be stuck on an obstacle. Move robot to a new location on a level
CLEAN (RED) flashing
surface.
Robot may be stuck on an obstacle. Move robot to a new location on a level
surface.
MAX flashing
Front bumper may be jammed. Check bumper.
Cliff sensors are reporting an error.
Wipe cliff sensors with a clean cloth.
CLEAN (RED) + DOCK flashing together
Robot cannot start due to an error. Turn off the power switch on the side of
the robot, wait five seconds, then turn power back on. Ensure your robot is
on a level surface with no obstructions.
CLEAN (RED) + MAX flashing together The dust bin has been removed and needs to be reinserted.
MAX + ! flashing together
A side brush is stuck. Remove debris from side brushes.
CLEAN (RED) + MAX + ! flashing together A drive wheel is stuck. Remove debris from wheel.
DOCK + MAX + ! flashing together
Blockage in brushroll. Remove obstruction.
DOCK + ! flashing together Make sure you are using the dock that came with your robot.
The robot is caught in a tight space or on an obstacle.
There is something stuck in the robot's front bumper.
CLEAN (BLUE) + MAX + ! flashing together
Clean any obstructions or debris from the bumper. Gently push the bumper
up and down and back and forth, making sure it moves smoothly.
The robot's wheels might be stuck, or something might be caught in them.
Check the wheels for obstructions and remove anything that might be
stuck or wrapped around the wheels.
CLEAN + DOCK + MAX + ! flashing together
Press down on the wheels, then let them spring back into place.
Rotate wheels back and forth.
CLEAN + DOCK + MAX flashing together Robot is in Find My Robot mode. You can deactivate this mode in the app.
For all other issues, please call Customer Service at 1-888-228-5531.
SOLUTION
s ha rkc l ea n.co m