System Software; Intel® Optane™/Raid Support; Intel® Optane™ Setup; Intel® Optane™ Setup Procedure - Monster semruk S7 V8.1 Manual De Usuario

EN

System Software

Your computer may already come with system software pre-installed.
Where this is not the case, or where you are reconfiguring your computer for a
different system, you will find this manual refers to Microsoft Windows 10.
Intel® Optane™/RAID Support
Note that your system can be set up as a RAID OR to support Intel® Optane™,
but it cannot be set to support both systems. You need to setup Intel® Optane™
or RAID before installing your Windows 10 operating system.
Intel® Optane™ Setup
Intel® Optane™ is a combination of a compatible memory device and Intel
Rapid Storage Technology software. This combination is designed to speed
up your system performance by caching boot data, executables, frequently
accessed data and system page files to a non volatile, low latency Intel®
Optane™ SSD.
Contact your distributor or supplier to see if your system supports this
technology.
Intel® Optane™ Setup Procedure
You need to setup Intel® Optane™ before installing your Windows 10 operating
system, and you will need to prepare the following in order to do so.
• The Microsoft Windows 10 OS DVD or USB flash drive.
• An Intel® Optane™ SSD installed in your system.
• The Device Drivers & Utilities+User's Manual disc.
1. Start-up your notebook computer and press F2 to enter the BIOS and go to
the Setup Utility.
2. Select the Advanced menu.
3. Select SATA Mode, press Enter and select Intel RST Premium...
and select <OK>.
4. Press F10 to "Save and Exit" and select <Yes>, however note below.
• Make sure the Windows 10 OS (DVD) is in the attached DVD drive or on a
USB flash drive and as the computer starts up it will automatically boot from
the Windows 10 OS DVD or USB flash drive.
06