Monster semruk S7 V8.1 Manual De Usuario página 10

Prepare the following before setting up your SSDs in RAID mode:
• The Microsoft Windows 10 OS on a DVD or USB flash drive.
• Two identical PCIe solid state drives.
• The Device Drivers & Utilities + User's Manual disc.
RAID Level
RAID 0
(at lease two SSDs
needed)
RAID 1
(at lease two SSDs
needed)
RAID 5
(at lease three
SSDs needed)
All SSDs in a RAID should be identical (the same size and brand) in
NOTE
order to prevent unexpected system behavior.
Identical drives reading and writing data in parallel to
increase performance. RAID 0 implements a striped disk
array and the data is broken into blocks and each block is
written to a separate drive.
Identical drives in a mirrored configuration used to protect
data. Should a drive that is part of a mirrored array fail, the
mirrored drive (which contains identical data) will handle all
the data. When a new replacement drive is installed, data
to the new drive is rebuilt from the mirrored drive to restore
fault tolerance.
RAID 5 (Parity) is the most regularly used secure RAID
level. RAID 5 consists of blocklevel striping with distributed
parity so data blocks are striped across the drives and parity
data is not written to a fixed drive, but is spread across all
drives. Using the parity data, the computer can recalculate
the data of one of the other data blocks, should that data no
longer be available. A RAID 5 array can withstand a failure of
a single drive so that no data is lost.
Table 1
RAID Description
Description
EN
09