Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TABLE OF CONTENTS
INTRODUCTION
Receiving and Uncrating . . . . . . . . . . . . . . . . . . . .2
How To Order Replacement Parts . . . . . . . . . . . .2
Installation/Operation . . . . . . . . . . . . . . . . . . . . . . .3
Maintenance/Safety Labels . . . . . . . . . . . . . . . . . .3
Conveyor Set-Up . . . . . . . . . . . . . . . . . . . . . . . . . .4
Electrical Equipment . . . . . . . . . . . . . . . . . . . . . . .4
How to Replace Rollers . . . . . . . . . . . . . . . . . . . . .4
Replacing Linear Bearings . . . . . . . . . . . . . . . . . .4
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . .4
Planned Maintenance Checklist . . . . . . Back Page
PARTS DRAWINGS
"A" Extended . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
"B" Extended . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Gate Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Parts Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Spanish Version . . . . . . . . . . . . . . . . . . . . . . . . . .8
INTRODUCTION
This manual provides guidelines and procedures for installing, operating,
and maintaining your conveyor . A complete parts list is provided with rec-
ommended spare parts highlighted in gray . Important safety information is
also provided throughout the manual . For safety to personnel and for proper
operation of your conveyor, it is recommended that you read and follow the
instructions provided in this manual .
• Receiving and Uncrating
1 . Check the number of items received against the bill of lading .
2 . Examine condition of equipment to determine if any damage
occurred during shipment .
3 . Move all crates to area of installation .
4 . Remove crating and check for optional equipment that may be fastened to
the conveyor . Make sure these parts (or any foreign pieces) are removed .
NOTE: If damage has occurred or freight is missing,
Contact your Hytrol Integration Partner.
• How to Order Replacement Parts
Included in this manual are parts drawings with complete replacement parts
lists . Minor fasteners, such as nuts and bolts, are not included .
When ordering replacement parts:
1 . Contact Dealer from whom conveyor was purchased or nearest HYTROL
Integration Partner .
2 . Give Conveyor Model Number and Serial Number or HYTROL Factory
Order Number .
3 . Give Part Number and complete description from Parts List .
4 . Give type of drive . Example-8" End Drive, 8" Center Drive, etc .
5 . If you are in a breakdown situation, tell us .
Jonesboro, Arkansas
Serial # 615415
2
Model
QR Code
YEAR
Capítulos
Tabla de contenido
Solución de problemas
