User Maintenance; Cleaning & Maintenance - Andis DNG-1 Instrucciones De Uso

4. To get a smooth edge, grind from the bottom of the nail up towards the tip.
5. Use a continuous side-to-side motion when grinding each nail; holding the tip in one
place too long can cause unevenness and over-grinding. Do not keep the grinding
wheel or stone against the nail for longer than three seconds at a time.
6. IMPORTANT: Do not apply excessive force when grinding. Let the speed of the grinder
do the work. Do not apply pressure to the nail with the spinning grinding wheel. Pressure
causes the nail to get hot and will cause pain to the dog.
7. Keep the nail grinder away from the nail when first starting, or the grinder may "grab" the
nail and cause loss of control or injury to the dog.

USER MAINTENANCE

The internal mechanism of your nail grinder has been permanently lubricated at the factory.
Other than the recommended maintenance described in this manual, no other maintenance
should be performed, except by Andis Company or an Andis authorized service station. To
contact Andis directly, please call our Customer Support Team at 1-800-558-9441
or email us at [email protected].
CLEANING & MAINTENANCE
• Turn the nail grinder OFF.
• Brush or blow off dust or other material from nail grinder after each use.
• Use a soft cloth to wipe off nail grinder.
• Replace grinding attachments when worn.
• Check cords and nail grinder for damage periodically.
Caution: Never handle your Andis nail grinder while you are operating a water faucet, and
never hold your nail grinder under a water faucet or in water. There is danger of electrical
shock and damage to the appliance. Andis Company will not be responsible in case of
injury due to this carelessness.
7