Braun KF 7020 Manual De Instrucciones página 10

f. strong
Use to select the brew strength (strong/normal).
g. 1-4
Use to brew smaller amounts of coffee (up to
4 cups).
Switching On/Off
• To switch on the coffee maker, press the On/Off
button (1). The green indicator light will illuminate
indicating that the coffee maker is in «ready»
mode.
• To switch off the coffee maker, press the On/Off
button again. The green indicator light will turn off
indicating that the coffee maker is in «stand by»
mode.
Auto Off Function
For your convenience and also additional safety,
the appliance will switch off automatically
40 minutes after the brewing cycle is complete.
Programming the Coffee Maker
Note: The device features a 60-second power loss
back-up system that remembers all programmed
information, including time of day and auto on times
in the event of a tripped breaker, unit is unplugged,
or power failure.
Setting the Time
When the coffee maker is first plugged in or when
power is restored after an interruption, the LED
control panel will start flashing 02:00.
• To set the hour, press the CLOCK button (d) for
a minimum of 3 seconds. The LED control panel
will start flashing (24h).
• Press the SET button to select the time format
(24h or 12h). To save the time format and to set
the hours, press the CLOCK button. The hours will
start flashing.
• Press and hold the SET button (e) to scroll
through numbers. Release the button once the
desired hour is displayed.
• To set the minutes, press the CLOCK button.
The LED control panel will start flashing.
• Press and hold the SET button (e) to scroll
through numbers. Release the button once the
desired hour is displayed.
• Press the CLOCK button again to save the desired
time.
• If during the setting process, no button is pressed
for 10 seconds the time currently set will be
saved.
Before programming, always switch on the
coffee maker.
Programming and Activating the Timer
• Press the TIMER button (b) for a minimum of
3 seconds.
10
• The hours in the LED panel will start flashing.
• Press and hold the SET button (e) to scroll
through numbers. Release the button once the
desired hour is displayed.
• To set the minutes, press the TIMER button.
The LED control panel will start flashing.
• Press and hold the SET button (e) to scroll
through numbers. Release the button once
the desired hour is displayed.
• Press the TIMER button again to save the desired
time.
• The pre-set auto on time will disappear after
3 seconds and the time of day will show on the
LED control panel.
• If during the setting process, no button is pressed
for 10 seconds, the auto on time currently set will
be saved.
This function can only be activated if the auto on
time and the time of the day have been set.
To activate the timer function:
• Press the TIMER button (b). The green LED above
the button will illuminate and the coffee maker will
start to brew at the pre-set auto on time.
• The pre-set auto on time disappears after
3 seconds.
• When the appliance starts brewing, the green LED
START will continually flash and the LED TIMER
turns off.
• Press the TIMER button (b) again to switch off the
function: the green LED light will disappear.
NOTE: The timer function remains activated even
when the appliance has been switched off (1).
Setting the Water Hardness Level
Set the water hardness level on the coffee maker to
the water hardness level for your local area.
• Press the CALC button (c) for a minimum of
3 seconds.
• The default setting (h3) will start flashing.
• Press the SET button (e) to scroll through the
options (h1 = soft, h2 = normal, h3 = hard) and
select the appropriate water hardness level.
• Press the CALC button again to save the hardness
level.
• The pre-set water hardness disappears after
3 seconds and the time of day will show on the
LED control panel.
Brew Strength Selector
• Press the STRONG button (f) to select brew
strength «strong».
• The green LED above the button will illuminate.
1 – 4 Cups Setting
• Press the «1-4» button (g). The green LED above
the button will illuminate.