Kohler K-6606 Guia De Instalacion página 5

6-5/8"
(16.8 cm)
47-1/2"
(120.7 cm)
Opening
47-1/2"
(120.7 cm)
39-1/4"
(99.7 cm)
Side Frame
Member 1x3 Min
The cabinet style shown is an example. Construct
the cabinet to fit your installation.
4. Custom Cabinet Installation - Using the Undermount Sink Kit
Refer to the installation instructions packed with the K-5807 undermount sink kit.
Route or cut the countertop according to the provided cut-out template.
Proceed to the "Custom Cabinet Installation - Tile-in Sink Cabinet Installation" section.
5. Custom Cabinet Installation - Tile-in Cabinet Construction
CAUTION: Risk of personal injury or product damage. Do not allow the floor sink to be supported
by the sink rim. The support framing, not the rim, should withstand the entire weight of the sink when
it is full of water.
Construct the support framing to fit your installation. An example is illustrated above.
Construct the support framing with exterior dimensions of 47-1/2" (120.7 cm) x 20-9/16" (52.2 cm).
Determine the height of the cabinet by finding your desired height of the floor sink rim and
subtracting 1/2" (2.3 cm) from the desired height.
Route or cut the countertop to 47-1/2" (120.7 cm) x 24-1/2" (62.2 cm).
Install the support framing in a position under the basin of the floor sink.
Permanently secure the countertop to the cabinet frame as desired.
Kohler Co.
Support Frame
Rough Countertop
Surface
Front Support
Frame Member
Back Frame
Member 2x4 Min
20-9/16"
(52.2 cm)
Sink
Support Frame
5
6-5/8"
(16.8 cm)
Cabinet
1013609-2-C