Mounting Instruction - Arachnid CricketPro 450 Instrucciones

UNPACKING THE GAME
Unpack your new dartboard carefully, making sure all parts are included. The following
components are included in this set:
 1 Electronic Dartboard
 6 Darts (unassembled)
 Soft tip replacement pack
 Owner‟s Manual
Choose a location to hang the dartboard where there is about 10 feet of open space in front of
the board. The "toe-line" should be 7‟ 9 1/4" from the face of the dartboard.
Locate a wall stud and place a mark 76.75" from the floor. Insert a screw in the center of the
wall stud at this height and hang the dartboard on this screw
If not mounting into studs, be sure to use drywall anchors or other securing hardware
appropriate to the wall you are using.
If you want to mount the dartboard even more securely to the wall, you can fasten four screws
(not included) through the holes located in the catch ring area (the area outside the scoring
segments). This will secure the board to the wall
Center of bullseye should be 5‟ 8" from the ground.
Plug the A/C adapter (if provided, some models are battery powered) into the wall outlet and into
the jack at the bottom right of the dartboard and you‟re ready to play.
All Rights Reserved
©2014 Escalade Sports

MOUNTING INSTRUCTION

4
E450ARA
For Customer Service Call 1-800-526-0451