Power Reserve; Moon Phase - Ball NM2038 Manual De Usuario

17. Power reserve

MODELS: GP1052, NM1056, NM2058, PM1058, PM2096
The display at bottom of the dial is the
power reserve indicator. It shows the
remaining power reserve in the watch in
hours. If the watch is not worn, or during
periods of low activity, the hand of the
power reserve indicator will wind down.
The BALL watches with power reserve function feature an indicator that
displays the remaining power reserve on a hand. The indicator will turn
counterclockwise as the power diminishes. During manual winding or when
the watch is worn, the reserve indicator will move clockwise.
The natural movements of your arms wind the watch up automatically and
the energy will be stored up as power reserve. Manual winding is only
necessary if you stop wearing your watch for several days or if it stopped.
Remarks:
Do not overwind the watch. Manual winding should be stopped when the
power reserve indicator reaches the end of the scale. Continued winding
could damage the movement.
All manuals and user guides at all-guides.com
36

18. Moon Phase

MODELS: NM1082, NM2082, NL3082, NM3082
The Engineer Master II Moon Phase (NM1082) has been the first moon
phase watch illuminated with the stunning H
phase wheel is activated by a 59-tooth gear, which shows the changes of
the Moon's phases as it goes through two of its 29.5-day cycles. The moon
phase disc is easily set via Position [1] of the crown. In order to prevent
damage to the movement, we advise not to turn the hands counterclockwise
while setting the time (Position [2] of the crown) and not to set the moon
phase function (Position [1] of the crown) between 3PM and 5PM.
Set the Moon Phase display by turning to the nearest Full or New Moon,
then moving forward by the appropriate number of days.
micro gas tubes. The moon
3
37