Cabling; Default Settings - Atlantis Land WebShare 144WN Guía Rápida

RESET
WPS
POWER (jack)

1.4 Cabling

First you must connect the product to the ADSL line through the RJ11
cable you have in equipment (in the port ADSL/LINE), then connect to the
RJ45 ports the PCs of your Lan or others Switch. You can get to the
Wireless Router through the different client wireless compatible with the
IEEE802.11b & IEEE802.11g/n standard. In the end connect the AC
Adapter to the Wireless N ADSL2+ Router and then to the socket. Once
you've checked all the connections and you've switched on the Wireless N
ADSL2+ Router the product will carry on immediately a diagnosis (60
seconds). Finished this the Led PWR (eventually even the Led LAN, if
connected to PCs) will be fixed blue (WLAN is blinking when wireless
module is loaded) . The Led ADSL, if suitably connected, at first will be
flashing and then it will remain fixed. You have to read Note (into section
1.8) in order to solve this problem

1.5 Default Settings

The WebShare Wireless N ADSL2+ Router can be configured with your
Web browser. The web browser is included as a standard application in
following operation
95/98/NT/2000/Me, etc. The product provides a very easy and user-friendly
interface for configuration.
After the device has turned on, press it to reset
the device or restore to factory default settings.
The operation is as below:

0-3 seconds: reset the device

3-5 seconds: no action

6 seconds or above: restore to factory
default settings (this is used when you
can not login to the router, e.g. forgot
the password)
Push the WPS button to trigger the Wi-Fi
Protected Setup function.
Connect the supplied power adapter to this jack.
systems, UNIX,
WebShare 144WN
Linux, Mac OS,
ENGLISH
Windows
31