EN
BATT ER Y F O R TH E ANA FI A N D T H E
PARR OT SKYCO NTR OL LE R 3
WARNING: Failure to follow all the instructions may result in serious injury,
property damage and irreparable damage to the battery, the Anafi, the Parrot
Skycontroller 3 and may cause a fire, smoke or explosion.
•
Always check that the battery is not damaged before charging or using it in
flight.
•
Never use a battery which has been dropped
•
Never use the battery when it or the product containing it has had an impact
or was involved in a crash.
•
Never use a damaged battery, or if there is an odour, overheating,
discolouration, deformation or leakage.
•
Never place heavy objects on the battery.
•
Anafi and Parrot Skycontroller 3 should only be charged using the USB cable
included with the device, and with a compatible USB charger or USB port
that meets the following requirements: USB-IF Battery Charging Spec, Rev
1.2.
•
Never trickle charge or charge under 3 V per cell.
•
The temperature of the battery should never exceed 60°C (140°F) otherwise
the battery may get damaged or ignite.
•
Never charge on flammable materials or surfaces, near flammable products
or inside a vehicle.
•
Never leave the battery inside vehicles.
•
Store the battery in a non-flammable and non-conductive container.
•
Never leave the battery unattended during the charging process.
•
Never disassemble or modify the housing's wiring, or puncture the cells.
Always ensure that the charger output voltage corresponds to the voltage of
the battery.
•
Do not short circuit the battery.
•
Never expose the LiPo battery to moisture or direct sunlight, or store it in a
place where temperatures could exceed 60°C (car in the sun, for example).
•
Keep your battery half charged for long storage.
•
Fully charge the battery when it has not been used for an extended period of
time. It might require several charge/discharge cycles to recover maximum
capacity.
•
Always keep it out of reach of children.
For more information about batteries, visit
http://www.parrot.com/support
8