3 Insert the concrete wall anchors (B2) into the pilot holes and use a hammer to make sure that the anchors are flush with
the concrete surface.
4 Align the wall plate on the wall mount with the anchors, insert the lag bolts (B1) through the lag bolt washers (B3),
then through the holes in the wall plate. Make sure that the wall plate is level. Tighten the lag bolts with a socket
wrench only until they are firm against the wall plate.
DO NOT over-tighten the lag bolts (B1).
CAUTION:
.
Concrete wall
14
Magnetic removable
bubble level
www.bestbuy.com/bestbuyessentials
B2
B3
B1
BE-MLFM