Using The Appliance - Philips HP4940 Manual Del Usuario

EnglisH
8
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.

using the appliance

1 Check if the dual voltage switch (on the bottom back part of the
handle) has been set to the local mains voltage before you connect
the appliance. You can adjust the position of the dual voltage switch
with a screwdriver or coin (Fig. ).
 Put the plug in the wall socket.
 Select the desired setting to switch on the appliance: (Fig. )
- 6:Strong airflow for fast drying.
- 5: Gentle airflow to protect damp hair from becoming too dry.
- 4: Cool airflow to set your style.
- 0: Off.
 To dry your hair, make brushing movements with the hairdryer at a
small distance from the hair.
concentrator
The concentrator enables you to direct the airflow at the brush or comb
with which you are styling your hair.
1 To connect the concentrator, simply snap it onto the appliance.
 To disconnect the concentrator, pull it off the appliance (Fig. ).
cleaning
Never rinse the appliance with water.
1 Switch off the appliance and unplug it.
 Clean the appliance with a dry cloth.
 Before you clean the concentrator, remove it from the appliance.
 Clean the concentrator with a moist cloth or rinse it under the tap.
Make sure the concentrator is dry before you use or store it.