Tripp-Lite PDUMNH20HV Manual Del Usario página 5

2. Features
A
201110150-93-3050.indb 5
Accessory Slot: An SNMP card, has been installed in the
slot, allowing the PDU to be monitored remotely.
Factory Port: The port is reserved for configuration by factory
authorized personnel only. Do not connect anything to the
port.
SNMP Card Ports:
PS/2 Port: Use this port to connect a Tripp Lite
ENVIROSENSE environmental sensor to provide remote
temperature/humidity monitoring and a dry contact interface
to control and monitor alarm, security and telecom devices.
Visit www.tripplite.com for ordering information. Note: Do not
connect a keyboard or mouse to this port.
Mini-DIN Serial Port: Use this port to provide a direct
terminal connection to a computer with a terminal emulation
program. A serial cable (part number 73-1025) is included
with the PDU. If you need to order a replacement cable, visit
www.tripplite.com.
Ethernet Port: Use this RJ-45 jack to connect the PDU to the
network with a standard Ethernet patch cable. The Link LED
and Status LED
A
B
shown in the table below. This port is not compatible with PoE
(Power Over Ethernet) applications.
Network Operating Conditions
Link LED Color
A
Off
Flashing Amber
Flashing Green
Status LED Color
B
Off
Steady Green
Flashing Amber
indicate several operating conditions, as
B
No Network Connection
100 Mbps Network Connection
10 Mbps Network Connection
Card Not Initialized
Card Initialized and Operational
Error - Card Not Initialized
5
11/9/2011 11:13:07 AM