2, 6, 10 thrEE-EYE chronograph - 1/10 sEc (cont)
Before using the stopwatch, reset the stopwatch hands to the '60' position by pressing pusher 'B'.
if stopwatch hands move improperly, reset the hands as follows:
To RESET SToPWATCh hANdS:
Big chronograph hand in the center (or counter 60 seconds):
1. PULL crown to position B
2. PRESS pusher B until the chronograph hand is reset to '60'
3. RESET crown to position A
CoUNTER hANd 1/10 + RIghT EyE:
1. PULL crown to position B
2. PRESS pusher A until the right eye hand is reset to '0'
3. RESET crown to position A
CoUNTER MINUTE hANd LEfT EyE:
1. PULL crown to position C
2. PRESS pusher A until the left eye hand is reset to '30'
3. RESET crown to position A
STANdARd SToPWATCh MEASUREMENT:
1. PRESS pusher A to start timing
2. PRESS pusher A to stop timing
3. PRESS pusher B to reset
ACCUMULATEd ELAPSEd TIME MEASUREMENT:
1. PRESS pusher A to start timing
2. PRESS pusher A to stop timing
3. PRESS pusher A to restart timing
4. PRESS pusher A to stop 2nd timing
5. PRESS pusher B to reset
SPLIT TIME MEASUREMENT:
1. PRESS pusher A to start timing
2. PRESS pusher B to 'split'
3. PRESS pusher B to begin again
4. PRESS pusher A to stop
5. PRESS pusher B to reset
TIMINg 2 CoMPETIToRS:
1. PRESS pusher A to start timing of 1st event
2. PRESS pusher B to stop timing of 1st event; stopwatch continues to run internally
3. PRESS pusher A to start timing of 2nd event
4. PRESS pusher B to view time of 2nd event
5. PRESS pusher B to reset
3, 6, 9 thrEE-EYE chronograph
NOTE:
Crown position 'A', 'B' and 'C'
Pushers A (Top right) & B (Bottom right)
6 o'clock eye – Hours elapsed up to 12 hours
9 o'clock eye – Minutes elapsed up to 30 minutes
3 o'clock eye – Permanent second hand
These instruction also apply to the 6, 9 Two-Eye Chronograph movement. Please note that the only difference is
that such movements do not have second eye.
All manuals and user guides at all-guides.com
7