ICON FIELD ARMOR 2 Manual Del Usuario página 4

USE
Selecting the Correct Size:
In order to ensure you choose the correct size Field Armor 2 Boot please see the table below
MEN'S SIZES
EU 41 42 43 43.5
US 8 8.5 9 9.5
UK 7.5 8 8.5 9
PPE Position and Fit:
For PPE to offer the maximum protection possible PPE must be placed on the areas to be protected and PPE must cover the protected areas
effectively. If the protective features are already incorporated into the PPE, then to be positioned correctly, the PPE must be the correct size. In all
cases, the proper equipment has been supplied to keep this PPE firmly in contact with the body.
Footwear:
Protective footwear fit is very important. The fit of different protective footwear styles varies due to differences in design and construction. Only use
protective footwear that fits properly. Any protective footwear that does not fit properly should not be used. Be sure that the protective footwear fits
snugly but not too tightly. Confirm that heel lift is minimal. Check to confirm adequate room in the toe box.
Wearing Instructions and Adjustment:
For each boot: Lift the 2 buckle levers located on the outside of the foot and release tension on the straps. Unhook the straps from the buckles by
removing the buckle pivot pins from the hooks on the buckle plates that capture them. Pull tongue forward. Insert foot, pulling the boot on. Slide foot
all the way down in the boot. Confirm boot fit. Boot should feel snug on foot but not too tight. Foot should be the same length as the boot without
being too much shorter or too much longer than the boot. Tuck the portion of the boot upper that is on the outside of the foot underneath the portion
of the upper that covers the tongue. Engage each of the buckles by placing the buckle pin in the hook on the buckle plate, and then pressing out
and down on the end of the buckle until it clips into the buckle plate. Be sure the buckle positively locks against the buckle plate. The buckle should
make an audible "click" when engaged correctly. The fit should not impair circulation of the foot. If any of the straps are too tight or too loose they
can be adjusted in the following manner: Unclip the buckle lever, grasp the free end of the plastic portion of the strap that is under the leather portion
of the strap. Gently pull (strap gets shorter) or push (strap gets longer) the end of the strap through the plastic mount in the center of the strap until
the strap is the desired length. Confirm that the teeth on the underside of the plastic straps are re-engaged with the small plastic mount at the end
of the leather portion of the strap and then re-engage the buckle as described above.
04
44 44.5 45 45.5 46 47
10 10.5 11 11.5 12 13
9.5 10 10.5 11 11.5 12.5
For maximum protection and safety the protective footwear should not cause any discomfort and should not reduce the rider's freedom of movement
or restrict the reach to, or operation of, the motorcycle controls while in a normal riding position. If you are unable to find a proper fit in this protective
footwear style, please try another CE certified protective footwear style.
48.5
14
13.5
SAFETY INSPECTIONS AND OBSOLESCENCE
Before Every Use:
Check the sole to confirm that it is good condition and attached securely to the boot. Check the lining to confirm that it is not ripped or torn. Check
uppers and adjustment straps to confirm that they are not cut or cracked. Check the buckles, and adjustment straps to confirm that they are not
broken, that they are not filled with debris, and that nothing prevents them from fastening securely. Protective footwear that is improperly fastened
cannot protect the user. If the protective footwear or any parts of them become worn, replace the footwear immediately.
In the Event of an Impact:
In the event of impact, the key elements of the protective footwear may become compromised and the protective footwear may no longer provide the
limited protection described above. The damage may not be visible to the naked eye. In all cases of impact, replace the boots. Replacement Field
Armor 2 Boots can be purchased at Icon® retail locations.
2 Year Rule:
In general, lightweight PPE such as the Field Armor 2 Boot should be replaced at least every 2 years even if the PPE has not suffered any damage.
Damage may be present and may not always be identified by a simple visual inspection.
SAFETY WARNINGS
05