Cleaning, Maintenance, Storage; Travelling With Smoothskin Pure Fit; Troubleshooting - Smoothskin PURE FIT Manual Del Usuario

13. CLEANING, MAINTENANCE, STORAGE

After treatment, always switch off SmoothSkin Pure Fit by unplugging the power supply from
SmoothSkin Pure Fit and the electrical outlet.
After use, the handset, skin tone sensor and treatment window should be inspected for damage and
wiped down with a dry, lint free cloth.
WARNING: The glass filter can get hot during use. DO NOT touch or clean the filter for at least 5
minutes after use to allow it to cool down.
NEVER use water or other cleaning fluids, as these can damage the device leading to a potential safety
hazard.
To ensure maximum performance of your SmoothSkin Pure Fit, it is particularly important to keep the
front of the device and reflector free from dirt, hair or other debris.
To aid in the cleaning of this part, the front of the device can be cleaned with a slightly damp cloth.
Store SmoothSkin Pure Fit in a cool, dry place. Make sure that the treatment window and skin tone
sensor on the handset are protected from damage.
Regularly check the device (including cords) for visible signs of damage. In case of damage or cracks,
stop using the device. To prevent strangulation or tripping hazard, always unplug the device from power
socket when not in use.

14. TRAVELLING WITH SMOOTHSKIN PURE FIT

The power supply unit of SmoothSkin Pure Fit is universal and will work with all commonly encountered
mains supplies. Providing you have a suitable adaptor for the mains power cable plug, SmoothSkin Pure
Fit will operate as normal.
34

15. TROUBLESHOOTING

PROBLEM
The power bar indicators on the side of the handset
do not light up when placed against your skin.
Whilst pressed against your skin, the first power bar
indicator on the side of the handset is illuminated
RED, and SmoothSkin Pure Fit will not work.
The power bar indicators on the side of the handset
are on or are flashing in an unfamiliar pattern
including a red LED indicator light.
SmoothSkin Pure Fit handset, treatment window,
power supply or cable are damaged, broken,
cracked or appear defective.
SOLUTION
Make sure the power supply is plugged in. Make
sure the handset is in READY mode (press the
Standby/Ready button once). Ensure the skin
sensors are pressed against the skin. Ensure the
skin tone sensor is pressed against the skin.
The area you are trying to treat is too dark for
treatment. SmoothSkin Pure Fit includes an
intelligent skin tone sensor that automatically
detects your skin tone and selects the optimal
treatment setting. Due to the nature of Intense
Pulsed Light technology, SmoothSkin Pure Fit is
not for everyone and cannot treat very dark skin.
SmoothSkin Pure Fit will display any error
messages through combinations of lights the on
the power bars on the sides of the handset. This
indicates that there is a fault with the device.
Stop using the device and refer to the website.
DO NOT USE. If you are in any doubt about the
safety of SmoothSkin Pure Fit or suspect it is
damaged in any way, it must not be used, and
you should refer to the website.
35