Kohler K-8816 Manual Del Usuario página 6

Rotate Control
Housing 180˚
5. Alternate Control Knob Positioning
NOTE: Installing the control housing in this manner will not affect the drain operation shown on the
previous page.
If you prefer to position the control knob indicator opposite of positions #1 and #3 shown on the
previous page, insert the control knob and rotate the control housing 180°.
The control knob indicator should now point toward the front of the sink when the drain is open
and the back of the sink when the drain is closed.
6. Connect the Drain Control to the Cable
CAUTION: Risk of product damage. Do not kink or loop the cable.
NOTE: The cable drain is assembled properly when the control knob indicator points toward the drain
that is closed.
Determine the preferred position of the control knob indicator.
Connect the cable(s) to the control housing by placing the cable ends into the sockets and pushing
the cable connectors over the cable sockets.
Hand tighten the cable connectors to the control housing.
Connect the right hand drain cable to the right hand control connection. Connect the left hand drain
cable to the left hand control connection.
113776-2-AB
Outer Flat
Toward Back of
Sink
Control
Flange
Control
Housing
6
Sockets
Control
Housing
Cable Ends
Cable Connector
(Part of Control Body)
Kohler Co.