Tabla de contenido
ACTUATORS - They receive a radio signal from the SmartConnect easy and trigger an action
Radio socket
Plug-In radio receiver
Universal radio receiver
Plug-In radio gong
Radio receiver for e-opener
Rolling shutter control
WIFI-ACTUATOR - It receives the wireless signal of the SmartConnect easy
Belkin WeMo radio socket
Philips HUE Lamp
4 Preparations
4 PREPARACIÓN
4.1Instalación de la app SmartConnect
4.1
Installation of the SmartConnect app
Es necesario instalar en el teléfono o tablet la app SmartConnect para realizar los procesos de
configuración.
The SmartConnect app you need can be found in the app store of your smartphone (see chapter
4.2 Conectando el SmartConnect
SmartConnect
App). For the further process please download the app.
Conectar el módulo en un enchufe Schuko en un lugar que se encuentre dentro del radio de
acción de los elementos que hay que operar.Compruebe que su red WLAN esté accesoble en
Indication: The instructions were presented using the example of the Apple iPhone app.
su teléfono,incluso en el exterior frente a la puerta.
Instale el módulo SmartConnect easy SOLO en el interior para evitar el polvo y la humedad.
4.2
Putting the SmartConnect easy into operation
In order to put the SmartConnect easy into operation, plug it into a Schuko socket. Select the position so
that there is sufficient radio reception between the SmartConnect easy and the applications. Please
note that your WLAN network must be reliably accessible to your smartphone, even outside the front
door. Only place the SmartConnect easy inside the building to
protect it from moisture and tampering.
CARL FUHR GmbH & Co. KG D-42579 Heiligenhaus
For controlling devices, e.g. lamp, pluggable between the socket and the device
to be switched
FUHR art. no. NZ80134
For controlling existing external drives, such as garage doors
FUHR art. no. NZ80088
For controlling existing external drives with external power supply, such as
garage doors
FUHR art. no. NZ80023
To receive a bell signal
FUHR art. no. NZ80122
For opening doors equipped with an electric door opener
FUHR art. no. NBFP675
For controlling roller shutters, radio receivers for flush mounting
ELDAT art. no. RCJ01-E5002-01-23K
For controlling devices, e.g. lamp, pluggable between the socket and the device
to be switched
WeMo Switch Box: EAN 0722868905814 and
WeMo Switch Insight Box: EAN 0722868992975
To turn Philips Hue lamps on and off via the SmartConnect app
Philips art. no. depending on the version
9 / 35
3.2
www.smart-door.net
Tabla de contenido
