Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Cable Set-up
- With the doors closed, place the cable following the steps and the path indicated in the
diagram. Start the process by adjusting it on the lock stopper of the door 1 (P1) using a
2.5mm Allen key.
PF
The lock can be disassembled from the Twin base and assembled to the other side if the
facility is reversed. To do this, you need to press the tabs at the base, as shown in the
diagram.
- Tighten and fix the cable in the same
lock where the trajectory began.
Make sure the carriers do not get out
of the stoppers.
- Then, fix lock 2 using a 2.5 mm Allen Key.
2
step 7
PF
1
23
Tabla de contenido
