HumanTechnik CM-1 Instrucciones De Servicio página 34

No. Control feature Function and application CM-1 charger
1 12 V
voltage input
2 Chraging cradle 3-pin charging cradle to hold the CM-1 transmitter unit or
for device
components
3 LED (red)
4 LED (green)
5 Bridge element
connector slot
6 Bridge
element
Installation of the CM charger
1. Plug the power supply unit into the 230 V mains.
2. Connect the CM charger to the power supply unit by inserting the round connector
of the power supply unit into the DC jack on the back of the CM charger.
Jack for the power supply unit on the back of the
CM-charger.
CM-1 receiver unit upright.
Standby indicator
Charge indicator
There is a connector slot in the base under a plastic cover.
A bridge element can be pushed into it to enable two CM chargers
to be connected.
Bridge element for connecting two CM chargers electrically.
English 33