Idiomas disponibles
Idiomas disponibles
1
4
1
4
A
5
1
3
2
Scope of supply:
1x headlight protector (1)
2
2x special screws M5x17 (2)
2x well nuts M5 (3)
2x shim strips 11x3 (4)
3
4
Preassembly
4
- Remove the headlight mask with the headlight (see the Owner's Manual).
Assembly
- Stick the shim strips (4) onto the headlight protector (1).
- Correctly position the headlight protector (1) on the headlight mask (5).
A
- With a non-permanent pen or pencil, mark the position of the holes (A) of
the headlight protector on the headlight mask.
- In the center of each marking, drill a hole with a diameter of 9.5 mm.
- Insert the well nuts (3) into the drilled holes from the front.
3
- Attach the headlight protector to the headlight mask with the screws (2).
2
Finishing work
- Mount the headlight mask with the headlight (see the Owner's Manual).
69008021060
60008008050
