How To Screed Form To Form - Marshalltown SHOCKWAVE SW100H Manual De Instrucciones

Length of blade should overlap form boards on both
sides of the pour.
Keep bottom of blade as flat as possible while striking
off of forms.
To ensure the longest possible blade life, use the
lowest possible vibration setting in relationship to the
slump of concrete being used.
TRAILING EDGE
An elevated trailing edge may provide an area for
concrete to build up resulting in a slab elevation that
is too high.
WS#570
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com

HOW TO SCREED FORM TO FORM

Form Board
ELEVATED
Width of Screed Blade
Width of Form
Form Board
KEEP SCREED BLADE FLAT
Form Board
ELEVATED
LEADING EDGE
An elevated leading edge can trap rocks between the
blade and forms resulting in a slab elevation that is too
high.
13 of 16