Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Press
or
Press the
Then press the
5.7 BACKLIGHT MODE
The display show as AUTO/ OFF / ON
AUTO
Press
or
Press the
AUTO: The backlight will be on automatically when a load exceeds 10e on the pan or pressing a key.
ON---The backlight will always be on.
Note:
1. When the scale is in the parameter setting mode, pressing
setting value is confirmed.
2. When the scale is in the parameter setting mode (any type of setting mode), pressing
key will return to normal weighing mode without making a change.
6. RS – 232 INTERFACE
6.1 MODE
Standard ElA-RS-232 C's UART signal
6.2 FORMAT
Standard ElA-RS-232 C's UART signal
Baud rate: 1200, 2400, 4800, 9600
Data bits 7/8 BITS
Stop bit 1 BIT
Code ASCII
RS-232 connector is a 9 pin D-subminiature socket.
Input Pin 2
16
key to move to last setting or next setting; or press
or
key to chooseto be enabling (y) or disabling (n). (Default: n)
key to confirm and move to next setting or press the
key to move to last setting or next setting; or press
or
key to choose the backlight mode: AUTO, OFF and ON. (Default: AUTO)
USER MANUAL BAP
key to enter into current setting.
key to move to next setting
key to enter into current setting.
key means the selected
EN
EN
Tabla de contenido
