Approved Power Unit; Safety Warnings; Important Safety Instructions - Makita EY402MP Manual De Instrucciones

Approved power unit

This attachment is approved to use only with the follow-
ing power unit(s):
• DUX60 Cordless multi function power head
• XUX01 Cordless multi function power head
• DUX18 Cordless multi function power head
• XUX02 Cordless multi function power head
• UX01G Cordless multi function power head
• GUX01 Cordless multi function power head
• EX2650LH Multi function power head
WARNING:
Never use the attachment with
non-approved power unit. Non-approved combi-
nation may cause serious injury.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear a helmet, goggles and ear protection.
Wear protective gloves.
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended.
Beware of electrical lines, risk of electrical
shock.
Keep distance at least 15 m.
Maximum permissible cut length
Direction of chain travel
Chain oil tank
Hot surfaces - Burns to fingers or hands.
About this instruction manual
The term "tool" in this instruction manual refers to the
combination of the attachment and the power unit.
The term "motor" in this instruction manual refers to
electric or engine motor of the power unit.

SAFETY WARNINGS

Important safety instructions

WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this machine as well as the instruction man-
ual of the power unit before using. Failure to follow
all instructions listed below may result in electric
shock, fire, and/or serious injury to the operator and/
or bystanders.
WARNING:
Do not operate near electrical
power lines. The unit has not been designed to
provide protection from electric shock in the
event of contact with overhead electric lines, Consult local regulations for safe distances from
overhead electric power lines and ensure that the
operating position is safe and secure before oper-
ating the saw chain pole pruner.
WARNING:
When using electric gardening
appliances, basic safety precautions should
always be followed to reduce the risk of fire,
electric shock, and personal injury, including the
following:
READ ALL INSTRUCTIONS.
1. Avoid Dangerous Environment - Do not use
appliances in damp or wet locations.
2. Don't Use In Rain.
Keep Children Away - All visitors should be kept
3.
at a distance from work area.
4. Dress Properly - Do not wear loose clothing or
jewelry. They can be caught in moving parts. Use
of rubber gloves and substantial footwear is rec-
ommended when working outdoors. Wear protec-
tive hair covering to contain long hair.
Use Safety Glasses – Always use face or dust
5.
mask if operation is dusty.
Use Right Appliance - Do not use appliance for
6.
any job except that for which it is intended.
7. Avoid Unintentional Starting - Do not carry
appliance with finger on switch. Be sure switch is
off before inserting battery pack.
8. Do not grasp the exposed cutting blades or cutting
edges when picking up or holding the appliance.
9. Do not Force Appliance - It will do the job better
and with less likelihood of a risk of injury at the
rate for which it was designed.
10. Do not Overreach - Keep proper footing and
balance at all times.
11. Stay Alert - Watch what you are doing. Use common
sense. Do not operate appliance when you are tired.
12. Store Idle Appliances Indoors - When not in use,
appliances should be stored indoors in dry, and
high or locked-up place out of reach of children.
13. Maintain Appliance With Care - Keep cutting
edge sharp and clean for best performance and
to reduce the risk of injury. Follow instructions for
lubricating and changing accessories. Keep han-
dles dry, clean, and free from oil and grease.
3 ENGLISH