Home Accents Holiday 730 645 Guia De Inicio Rapido

Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always
be followed, including the following:
READ AND FOLLOW ALL
a.
SAFETY INSTRUCTIONS.
b. Do not use seasonal products outdoors unless marked suitable for
indoor and outdoor use. When products are used in outdoor
applications, connect the product to a Ground Fault Circuit Interrupting
(GFCI) outlet. If one is not provided, contact a qualified electrician for
proper installation.
c. This seasonal product is not intended for permanent installation or use.
d. Do not mount or place the product near gas or electric heaters,
fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails, or place
on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring for the
night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire, burns,
personal injury and electric shock it should not be played with or
placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or light string.
k. Do not close doors or windows on the product or extensions cords as
this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any material that is not a
part of the product when in use.
m. This product has a polarized plug (one blade is wider than the other) as
a feature to reduce the risk of electric shock. This plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Do
not use with an extension cord unless plug can be fully inserted. Do not
alter or replace the plug.
n. This product is equipped with push-in type lamps. Do not twist lamps.
o. This product employs overload protection (fuse). A blown fuse
indicates an overload or short-circuit situation. If the fuse blows, unplug
the product from the outlet. Also unplug any additional strings or
products that may be attached to the product. Replace the fuse as per
the user servicing instructions (follow product marking for proper fuse
rating) and check the product.
p .Read and follow all instructions that are on the product or provide with
the product.
SAVE THESE INSTRUCTIONS
q.
Pre-Assembly
Package Contents
Part Description
A Tree top, tag 1
B Tree center, tag 2
C Tree bottom, tag 3
D Tree stand
Assembly
Assembling the tree stand
Step 1.Choose a location near a wall outlet.
Step 2.Unfold the legs of the tree stand (D) and lay the stand on the floor.
Step 3.Slide the locking disk of the tree stand (D) down until it snaps into
place.
Assembling the tree
This tree assmebles with Quick Set® technology ---Set up and
light up your tree in less than 10 minutes!
Step 1.Remove the protective caps from the tree bottom (C) and insert
the pole into the tree stand (D).
Step 2.Remove the protective caps from the tree center (B) and insert the
pole into the tree bottom (C) .
Step 3.Remove the protective cap from the tree top (A) and insert the
pole into the tree center (B).
Step 4.Shape the branches to your preference by working from the
bottom to the top. When adjusting branches, ensure that all wires
are free of branch hinges.
Quantity
1
1
1
1
S50
Section 1
S100
S100
Section 2
S100
S100
Section 3
S100
S100
Step 5.Insert the green label extension cord plug into the wall outlet. All
your lights should now be lit.
Step 6.When finished shaping the branches, slightly upsweep all branch
tips for a uniform look.
Operation
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any loose plugs
and/or broken, loose, or missing bulbs. Replace bulbs promptly with the
replacement bulbs provided in order to maintain the performance and
life expectancy of your tree.
Step 1.Connect the light strings of the tree together and plug the power
cord into a wall outlet.
Step 2.If the tree comes with a foot pedal, step on the On/Off button.
Maintenance
Spare parts
This tree package includes hinge pins, washers, bulbs, and fuses for any
replacement or repair that you need to perform on your tree. If extra parts
are needed, contact the Customer Service Team at 1-877-527-0313
between the hours of 8 am and 5 pm EST, Monday through Friday.
Repairing Loose Hinges
Step 1.Place the branch into the slot of the bracket
Step 2.Insert a new hinge pin through the holes of the bracket and secure
with a washer.
Use and Care Instructions
1. Before using or reusing, inspect product carefully. Discard any products
that have cut, damaged or frayed wire insulation or cords, cracks in the
lampholders or enclosures, loose connections, or exposed copper wire.
2. Before disassembling the tree, unplug the tree and remove all
ornaments and decorations.
3.Gently lift the tree top straight up to remove from the center section
and fold all branches towards the pole.
4.Repeat this step for the center and bottom tree sections.
5. When storing the product, carefully remove the product from
wherever it is placed, including tree, branches, or bushes, to avoid
any undue strain or stress on the product conductors, connections,
and wires.
6. When not in use, store neatly in a cool, dry location protected from
sunlight.
Troubleshooting
Problem Solution
The tree does not Ensure that all tree sections are plugged into
light each other and that the tree is plugged into
the wall. If your tree came with a foot pedal,
step on the On/Off button.
Check for blown fuses at the light string and
power cord plugs. Replace as needed with the
replacement fuses provided.
Check for loose, broken, or missing bulbs and
replace as needed with the replacement bulbs
provided
Christmas Tree
Sku # 730 645
Do Not Tamper
Internal Parts
Remove the
protective cap
Do Not Tamper
Internal Parts
Remove the
protective cap
Insert
Green Label
Foot Pedal
Plug Into Wall
on/off Switch
Outlet