Inrush current
I mains (A)
I max
max/2
Tref
!
-
The luminaire shall be installed by a quali ed electrician and wired in accordance with the latest
IEE electrical regulations or the national requirements.
-
The light source of this luminaire is not replaceable; when the light source reaches its end
of life the whole luminaire shall be replaced.
-
During installation or maintaining the luminaire please use gloves to avoid spots on the cover.
• To remove dirt and spots use the following:
• Dust: use micro ber cloths only.
-
Fingerprints, etc.: use a cleaner for synthetic materials with antistatic properties.
-
Luminaires not suitable for covering with thermally insulating material
-
Luminaire must not be used or stored in corrosive environment where hazardous materials
such as Sulphur,Chlorine, Phthalates, etc, are present.
-
Only to be installed outside arm's reach.
-
If the external exible cable or cord of this luminaire is damaged, it shall be exclusively replaced
by the manufacturer or his service agent or a similar quali ed person in order to avoid a hazard.
According to new ErP requirement
I nom.
Time (us)
5/10
SM136V PSU
Electrical characteristics
Imax (A)
15.3
Tref (µs)
290
MCB
No. of luminaires max.
B-10 A
21
B-13 A
28
B-16 A
35
B-20 A
45
B-25 A
56
C-10 A
37
C-13 A
48
C-16 A
60
C-20 A
76
C-25 A
96
SM136V PSD
14.1
212
17
24
30
37
47
30
40
50
63
80
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE
DEVICES
