Technical Specifications; Electrical Connections - Master SET METIS IRO Manual Del Usuario

Dear Customer, thank you for purchasing a MASTER product. This manual describes the operations for a correct installation of SET, METIS and IRO. The tubular motors with mechanical
limit switch series SET, METIS and IRO are suitable to command the main types of roller blinds. The technical characteristics are provided on the label stuck on the motor tube. These
devices have not been studied to a continuous working. Any other use is improper and forbidden and it could void manufacturer's warranty.
The installation of the product must be done by a qualified technician. At the end of the installation, all manuals must be given to the end user and he has to keep them for future reference.
The manufacturer can not be held responsible for any damage caused by improper, incorrect or unreasonable use.

01. TECHNICAL SPECIFICATIONS

Power supply:
Frequency:
Memorizable transmitters:
Memorizable sun sensor:
02. WARNINGS
02.1 WARNINGS FOR SAFETY
Incorrect installation can cause serious injuries
and maintenance operations must be carried out only by a qualified and skilled technician, who must comply with laws, provisions, local regulations and the instructions given on this
manual The electrical wiring must comply with current IEC standards
safety devices To prevent potentially dangerous situations, check the operating condition of the roller shutter/awning regularly
02.2 WARNINGS FOR INSTALLATION
Check that the package is intact and has not suffered damages in transit A heavy knock and the use of unsuitable tools can cause the damage of the external or internal parts of the motor
Do not pierce or tamper with the motor in any way. Do not modify or replace parts without the manufacturer's permission Do not carry the motor by the power cable. The product may not be
used if the power cable is damaged. Do not try to replace the power cable
motor must be sufficient for the applied load (check the rated data shown on the motor)
roller shutter/awning. It is essential to choose a motor with the most suitable torque for the application, considering the actual traction of the roller shutter/awning, and to avoid motors that
are too powerfull Use winding rollers that are at lease 10/10
correspond to the winding roller used. Adapters, support, and sundry accessoriesrelated to the motor must be chosen exclusively from the MASTER catalogue If the product is installed at
a height of less than 2.5 m from the floor or from another support surface, the mocving parts must be protected with a cover to prevent accidental access. In any case, ensure access for
maintanance work The power cable must be positioned in such a way that it does not come into contact with moving parts The power cable of the product is suitable for indoor installation
only. If installed outside, place the cable in a protective tube
near metal surfaces Position the buttons withing sight of the roller shutter/awning but a long way from its moving parts. Position the buttons more than 1.5 m from the floor The motor are
studied for residential use; the maximum continuous operating time is 4 minutes
thermal cut-off, which stops the motor if it overheats. The motor returns to normal operation when its temperature drops below the safety limit (normally after 5 or 10 minutes)
must be installed so that it cannot come into contact with liquids and in any case in a position protected from atmospheric agents
antenna cable as this would be dangerous. If the antenna cable is damaged, replace the product For your safety, do not work near the winding roller while the motor is powered
02.3 WARNING FOR USE
The product is not intended for use of persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they are supervised or
given instructions on how to use the product by a person responsible for their safety
involved in its movement. Check the automation during the movement and keep people at a safe distance, until the movement ends
the fixed control devices. Furthermore, keep the portable control devices (remote controls) out of reach of children
operations are being carried out (e.g. window cleaning). If the control device is automatic, disconnect the motor from the power line.
Disposal
Environmental conservation is an everyone's duty!! MASTER uses packaging recyclable materials. Dispose materials on the proper containers, complying with the law in
force in your locality. If you are an installer and you use many motors, please ask for cavities box packaging to your retailer or to the manufacturer, this is an environmental
respectful choice, that limits waste and considerably reduce the packiging materials. This product may have substances that are polluting for the environment and dangerous
for the health. At the end of the product life cycle, carefully comply with the waste disposal rules. It is strickly forbidden to dispose the product on the domestic waste.
Notes on radio systems
It is advisable to avoid using radio systems in areas with strong interference
A technical inspection is in any case advisable before installing any radio system in order to identify sources of interference. Radio systems can be used where possible disturbances or
malfunctioning of the transmitter or the receiver do not cause a risk factor, or if the risk factor is cancelled by suitable safety systems.
The presence of radio device operating on the same transmission frequency (
functionality of the installation.

03. ELECTRICAL CONNECTIONS

gray
black
brown
Motor
cable
blue
yellow/green
03.1 WARNINGS FOR THE INSTALLER
Make connections with power supply disconnected
breaker. The installer must fit an isolation device (with 3,5 mm minimum opening on the contacts) upstream of the system
short circuits. You must provide, on the supply line, an adequate protection to the load, for example a fuse of maximum value 3,15 A
so they must be properly insulated and protected
R
SET METIS IRO
tubular motor with mechanical limit switch and integrated radio receiver
WE RECOMMEND, FOR A PROPER INSTALLATION, READ THIS MANUAL.
120 o 230 Vac, 50/60 Hz
433.42 MHz
15 (inclusi sensori radio)
1
Keep these instructions for future maintenance work and disposal of the product
Some applications require «hold-to-run» operations and can exclude the use of radio controls or require particular
Any screws needed to complete the installation must not come into contact with the motor
Leave 1-2 mm of right/left play on the winding roller
If there are several radio appliances in the same system, they must not be less than 1,5 m apart
433 Mhz
Manual command
(optional)
Use only button with
momentary positions
( "hold-to-run" )
L (phase)
N (neutral)
Check that the power supply does not depend from electrical circuits for lighting
Memorizable wind sensor:
Working time:
Range (estimated):
Some steps of programming and/or normal operations make use of the mechanical stops of the
During operation the motor body becomes very hot, so be careful
Before operating on the roller shutter/awning, make sure there are no people or objects in the area
(for example, near police stations, airports, ports, hospital, etc.).
) can interfere with the radio receiver of the motor and so reduce the range of the system and limit the
WARNING:
when the motor is powered and
does not have a remote control
in memory, it performs a series
of movements.
Read the paragraph 05 before
power the motor!
4
120 seconds
100 m outdoor, 20 m indoor
All the product installation, connection, programming
Check that the shape and size of the drive pulley and adapter crown
The motor contains a self-resetting
The antenna cable carries line voltage. Do not cut the
Do not allow children to play with the appliance or with
Do not operate on the roller shutter/awning when maintenance
The supply line must be equipped with a circuit
The product doesn't provide any protection against overloads or
Command buttons are connected to the main voltage,
433,42 MHz
rev04.2 28.03.18
The power of the
Do not install the product
The motor