Remote Control Function - Leggett & Platt Style Glass Top Manual Del Usuario

FLASH LIGHT BUTTON
Press and hold to turn the flash light ON.
Release the button to turn the flash light OFF.
UNDERBED LIGHT BUTTON
Press to turn on/off underbed light feature.
HEAD UP/DOWN BUTTON
Press and hold to raise or lower the head
Press to adjust the base to the factory
default snore position. To reprogram, adjust
the base, massage, and underbed light to
the desired position, then simultaneously
press and hold the Set button and Snore
button until an audible sound is heard, then
release both buttons.
Press to lower the base to the level position.
This button also turns off massagers.
HEAD MASSAGE INCREASE BUTTON
Press to turn on head massage. Press again
to increase massage intensity. Massage
turns off automatically after 15 minutes.
HEAD MASSAGE DECREASE BUTTON
Once head massage is turned ON, press to
decrease massage intensity. Once massage
is at the lowest intensity, press again to turn
Use to program ZG, Snore, and Memory
Press to turn massage on in wave mode.
Press again to cycle through wave speeds.
REMOTE CONTROL REQUIRES (3) AAA SIZE BATTERIES. TO CONSERVE BATTERY LIFE, THE
TRANSMITTER TURNS OFF ALL FUNCTIONS WHEN ANY BUTTON IS PRESSED FOR MORE THAN
ZG, Snore, and Memory buttons:
To clear programmed settings and revert back to factory settings, simultaneously press and hold the HEAD DOWN button and FLAT
button until an audible sound is heard, then release buttons.
2

REMOTE CONTROL FUNCTION

section.
SNORE BUTTON
FLAT BUTTON
massage OFF.
SET BUTTON
presets.
WAVE BUTTON
UBL LOCK
HEAD FOOT
FLAT
SNORE MEM
ZGRAV
SET
HEAD MASSAGE
FOOT
NOTE
50 SECONDS.
LOCK BUTTON
To lock / unlock the remote control buttons,
press and hold lock button for 5 seconds.
Backlight will flash 3 times.
DUAL UP BUTTON
Press and hold to simultaneously raise the
head and foot sections.
FOOT UP/DOWN BUTTON
Press and hold to raise or lower the foot
section.
MEMORY BUTTON
Press to adjust the base to the factory default
memory position. To reprogram, adjust the
base, massage, and underbed light to the
desired position, then simultaneously press
and hold the Set button and Memory button
until an audible sound is heard, then release
both buttons.
ZG (ZERO GRAVITY) BUTTON
Press to adjust the base to the factory default
ZG position. To reprogram, adjust the base,
massage, and underbed light to the desired
position, then simultaneously press and hold
the Set button and ZG button until an audible
sound is heard, then release both buttons.
FOOT MASSAGE INCREASE BUTTON
Press to turn on foot massage. Press again
to increase massage intensity. Massage turns
off automatically after 15 minutes.
FOOT MASSAGE DECREASE BUTTON
Once foot massage is turned ON, press to
decrease massage intensity. Once massage
is at the lowest intensity, press again to turn
massage OFF.