HyLoft 00720 Instrucciones De Montaje página 4

2. Attach Crossbars and Adjust Height
2A:
Connect each Crossbar (B) to (2) Ceiling Downrods (C)
using the second hole from the ends using (2) 1/4" x 1/2"
Hex Bolts (F) and (2) Flange Nuts (H).
3. Place and Attach Grids
Sticker
3A:
Lay Wire Grids (A) evenly on Crossbars (B). Attach Wire
Grids (A) to Crossbars (B), using (4) 1/4" x 1-1/4" Carriage
Bolts (D) and (4) 1/4" Flange Nuts (H).
Note: Long grid wires are on the bottom and extended
past Crossbars (B) equally on both sides.
You have now completed the installation and are ready to load your new HyLoft Storage Unit.
(Maximum 150 lbs. per 36" x 36" unit, evenly distributed.)
Place HyLoft Sticker (M) provided on a crossbar for easy reference information.
Periodically, (at least annually) check all connections to ensure that they remain tightly fastened.
Page 4
Four-wire clusters
nearest Downrods
Adjust
Support Bar
to Desired
Length
2B:
Connect Crossbar (B) and Lower
Downrods (C) to Ceiling Downrods (C),
using (2) 1/4" x 1/2" Hex Bolts (F) and
(2) Flange Nuts (H).
3B:
Fasten together Wire Grids (A) using (2)
Plastic Tie Straps (K) or (2) #6 x 1" Carriage
Bolts (E) through the double wires with
(2) #6 Washes (J) and (2) #6 Hex Nuts (I).
310487_REV_A_0718