Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3172492-003 EPIFA.QXD 14/02/14 10:12 Página 29
INCIDENT
The control dial is in position
and the door is still locked.
The control dial is in position
, the oven is cold and the
door is still locked.
I have turned the control dial
to position
. The pilot light
is lit up, the P symbol is
flashing on the timer display
and there is a beep every 5
seconds.
CAUSE
The oven has not cooled down
to the safe temperature.
You have not followed the
instructions to cancel the
operation correctly.
You have not selected one of
the programmes (P1, P2 or
P3).
SOLUTION
Wait until the temperature
lowers and pilot light
off.
1. Turn the control dial to
position
and wait for 1
minute.
2. Turn the control dial to
position
and wait for 1
minute.
3. Turn the control dial to
position
again and wait
until pilot light
turns off.
Press + or – to choose one of
the programmes (P1, P2 or P3)
to start the pyrolytic cycle.
turns
29
Tabla de contenido
