Included Accessories - Baby Lock BNCW Guia De Instalacion

Included Accessories

1. CD-ROM (for machines)
• Certification Key Issuing Wizard
• Embroidery patterns (30 cutwork patterns)
2. CD-ROM (for Palette)
• Upgrade application to Palette Version 9.2 with Cutwork
To create original cutwork patterns in Palette Ver.9, install this upgrade application. This upgrade
application is intended for owners of Palette versions 5 through 9.
For details on the upgrade procedure, refer to "INSTALLING PALETTE VERSION 9.2 WITH
CUTWORK ON THE COMPUTER" on page 18.
Users who do not have Palette version 5 through 9 should purchase Palette Ver.9.
Contact your nearest authorized Baby Lock retailer for details.
3. DVD-ROM (video tutorials)
A DVD-ROM drive and playback software are required for viewing the tutorial DVD on a
computer.
4. Installation Guide
This manual
5. Quick Reference Guide
This provides an introduction to the cutwork patterns on the enclosed CD-ROM (for machines).
6. Cutwork needle set
Install all four cutwork needles in the machine for fabric cutting.
7. Cutwork needle-changing tools (2)
Use the included tool to hold the cutwork needle when replacing the embroidery needles.
8. Needle plate spacer
Install the needle plate spacer to prevent cut fabric from getting caught under the machine's
needle plate.
9. Water-soluble stabilizer 75 cm × 30 cm (29-1/
2 inches x 11-3/4 inches) (Non-woven type)
Use a water-soluble stabilizer when stitching the cut edges of a design or when embroidering
using the net fill stitch. A sheet of non-woven water-soluble stabilizer is supplied. Optional film-
type water-soluble stabilizers are available for use.
Note
• Please refer to page 4 for Instruction Manual download information.
Part Name
Description
GETTING STARTED
Part Code
XF1988-001
XF2004-001
XF2037-001
XF1980-001
XF1982-001
XF2025-001
XF2019-001
XF1978-001
–
5