Hkoenig MGX90 Manual De Utilización página 8

Automatic start time
4.
In standby mode, press the TIMER button to start the automatic start time function. The clock
symbol on the display lights up. In this mode, all buttons are unavailable except the TIMER button.
The automatic start time flashes and the machine returns to the current time after 3 seconds. If
the automatic switch-on time matches the actual time, the machine runs automatically. The
operating indicator flashes and the symbol for the automatic switch-on time goes out.
Brewing settings
5.
In standby mode, press the
symbol appears in the display. To brew, press the ON/OFF switch. The machine starts the brewing
without grinding operation. The operating indicator flashes.
Grinding and brewing
6.
When the
You can set the coffee strength with the
Press the ON/OFF button to start the process. The machine first grinds the beans and then brews
the powder. When the water has completely drained from the tank, the machine switches to keep
warm mode.
Keep warm mode
7.
When the brewing process is complete, the appliance goes into keep warm mode. The operating
light is on and the appliance indicates this by humming three times. When the warm-keeping mode
ends (after 40minutes max.), the machine goes into standby mode. The unit hums three times and
the operating lamp goes out.
Decalcification mode
8.
When the machine needs to be cleared of calcium, the clear calcium icon
illuminate.
Decalcify the machine with a commercially available decalcifier or a water/vinegar mixture. Fill the
water tank with the mixture and run the mixture through the machine once. Then fill the water tank
with fresh, clean water up to the MAX mark and allow the water to run through as well.
In standby mode, briefly press the CALC button to start the decalcification process. The light on
the CALC button flashes and the display shows the symbol
decalcification process after a few minutes (or during the process). Decalcification is complete.
Abnormal indication: Buzzer beeps twice and machine will enter the standby mode when the gate
above the filter holder is closed or opened abnormally.
button to select the only brewing function. Press until the brewing
symbol is lit on the display, the machine is in grinding and brewing mode.
button. Press the
.Press the CALC button to stop the
button to set the number of cups.
on the display will