VACHERON CONSTANTIN HEURES CRÉATIVES HEURE DISCRÈTE Manual De Instrucciones página 5

Opening/closing
The crystal and dial of the watch are protected by a pivoting shutter
(II) which can be rotated to show the time or convert the watch into
a piece of jewellery.
Setting instructions
Winding and time setting:
The winding and time-setting crown (I) can be placed in two
positions A and B.
A: Pressed down against the case, winding position.
This is the normal position when the watch is being worn and
guarantees the best water-resistance.
The watch must be wound every day, if possible at around the same
time. Do not force the winding mechanism when you feel resistance
increasing.
B: Time setting position.
When pulled out in this position, the winding and time-setting
crown (I) allows the time to be set. Rotate the winding and time-
setting crown (I) to set the hands to the required time. Then push
the winding and time-setting crown (I) back to position A.
10
Water-resistance
The water-resistance of the watch has been tested at a pressure
of 3 bar.
11