Giroo MAX-R off-road Guía Rápida De Uso página 13

MAX-R
EN
Ø
INSTALLATION AND REPLACEMENT OF BATTERY IN
CONTROLLERS
1 • Remove the battery cover on the controller.
2 • Set the double-layer as per the correct polarity and the replace the
battery cover.
3• If buttons does not work effectively or the indicating light becomes
dim, replace batteries with brand news 9v double-layer one as per steps
1 and 2.
Ø
NOTICE
1 • During the conversion of forward and backward, there may cause twit-
tering or tossing at 180. This is not malfunction. Take it easy to use it.
2 • Do turn off power switch after running it If not, electric energy will be
exhausted bit by bit and working time would be shortened.
Ø
INSTALLATION AND REPLACEMENT OF BATTERIES
IN CAR BODY
1 • Make sure the power switch at the rear of the car is at OFF position,
then unscrew the battery cover and pull to open it.
2 • Insert the plug of original battery pack into the battery socket.
3 • After loading the battery, shut the cover and fix the screws.
4 • When the car slows down, take out the batteries and recharge them.
13