auna Connect 100 Manual De Instrucciones página 21

Alarm
Timer
Language
Dimmer
Display
Power Management
All manuals and user guides at all-guides.com
There are three independent alarms - 2 alarms of absolute time setting (Alarm 1
and Alarm 2) and 1 alarm for relative time setting (Alarm NAP). Press Alarm on the
remote control to enter this menu directly.
The first two alarms are similar to the normal alarm. Turn on, then set the time
and set it alarms every day, once or every specific day of week. Choose Sound to
set the sound to Beep, Melody or Internet Radio.
Note that the alarm source is from the preset Internet radio if Alarm Sound is set
to be Internet Radio. It can only set one same IR station for Alarm 1 and Alarm 2.
When the alarm time is reached, the unit connects to the Internet if the set net-
work is available. Therefore there may be some delay from the alarm to the radio
play. If no network is connection can be established within one minute, the alarm
will change to Melody automatically.
When Alarm NAP is set, it alarms once in 5/10/20/30/60/90/120 minutes depen-
ding on which one you have set.
Choose Alarm Volume to configure the volume of the alarms.
When the alarm(s) is/are set, there will be a clock icon at the top of the display.
The clock icon with alarm time will also clearly display on the standby mode
screen. During alarm, press SNOOZE on the device to enter to snooze mode. It
will alarm again in 5 minutes. Press any other button to stop the alarm.
Set the time count down for cooking. In standby mode, the timer function is off.
Setting the timer: use the arrow buttons to adjust the time (from 00:00 to 59:59).
Then press OK to confirm, the countdown commences. Press HOME/MODE to
return to the previous screen.
When the timer countdown is up during the playing mode, it alarms and automa-
tically goes to TIMER screen.
Press any key to stop the alarm. You can adjust the volume in the timer screen.
Please note: Alarm and Sleep functions will be restricted during the timer countdown.
Select the desired OSD language (English, German, Spanish, French, Portuguese,
Italian).
Configure the brightness of backlight on the display. Select Standby to set the
brightness of backlight in standby mode, and select Active to set that in opera-
tion mode.
Choose Dimmer Timer to set the duration of the radio changing backlight when
you are not controlling it.
Set the display to Color display or Monochrome display.
Configure to go to standby mode automatically during in the menu or/and wit-
hout Wifi signal. Choose the power management timer (5/15/30mins) to set the
duration of the radio to switch standby mode automatically when you are not
controlling it. Choose Turn off to ignore the power management function.
21