Chauvin Arnoux PEL 106 Guia De Inicio Rapido página 7

Indicators
Green indicator: Wi-Fi
Indicator off: Wi-Fi is not activated.
Indicator lit: Wi-Fi is activated but not sending.
Indicator blinking: transmission by Wi-Fi in progress.
Blue indicator: Bluetooth
Indicator off: Bluetooth link de-activated.
Indicator lit: Bluetooth link activated but not transmitting.
Indicator blinking: Bluetooth link activated and transmitting.
Green indicator: Recording
REC
Indicator blinking once every 5s: recorder on standby.
Indicator blinking twice every 5s: recorder in record mode.
Green/orange indicator: Start/Stop
Indicator lit green: The instrument is on and is powered by the voltage inputs.
Indicator blinking orange: Supply by the voltage inputs is de-activated.
SD MEMORY CARD
The PEL accepts SD and SDHC cards, FAT32 formatted, up to a capacity of 32 GB.
The PEL is delivered with a formatted SD card. If you want to install another SD card:
Check that the new SD card is not locked.
„
Format the SD card using PEL Transfer (recommended) or using a PC.
„
Open the elastomer cap marked
„
Press on the SD card in the instrument and withdraw it.
„
Warning: do not withdraw the SD card if recording is in progress.
Insert the new card and push it home.
„
Put the elastomer cap back on to keep the instrument waterproof.
„
INSTALLING PEL TRANSFER
Do not connect the instrument to the PC until you have installed the software and the driver.
Insert the CD in your CD-ROM drive.
„
Go to the PEL_Transfer_software directory and run setup.exe.
„
Then follow the installation instructions.
„
Remark: For complete installation instructions, refer to the manual on the CD-ROM.
OPENING PEL TRANSFER
Connect the voltage inputs of the PEL to mains. The instrument is turned on.
„
Connect the PEL to the PC using the USB cable provided. Wait until the driver
„
is fully installed before continuing.
Double-click on the PEL icon
„
Select the Add instrument
„
menu.
Follow the instructions of the Add an instrument wizard. If PEL Transfer does
„
not detect the instrument in the pull-down list, click on the Update button.
When the connection with the instrument is established, the name of the
„
instrument should appear on the side left of the window in the PEL Network
branch of the tree.
Colour and function
.
®
on the desktop to open PEL Transfer.
icon in the toolbar or in the main Instrument
Example of PEL Network directory