Tabla de contenido
Idiomas disponibles

Idiomas disponibles

troUBLeShootinG

Symptom
1. Motor does not run.
2. Coins are not sorting into the tubes.
3. Coin falls inside the machine.
4. Coin tube rows will not move.
1. Check that the power cord is plugged in.
2. Check that the power switch is turned on.
3. Press the RUN/STOP button again.
4. Check that the tube trays are in the correct position: pushed all the way in.
Foreign objects and bent, damaged, or sticky coins may cause the machine to jam:
1. This machine is designed to resolve jams automatically. Wait about 15 seconds as
the agitation screw and running vessel rotate back and forth to release the jam.
2. If the machine is still not sorting, push the RUN/STOP button.
3. Loosen the hopper lid screw with a coin.
4. Lift the hopper lid and remove the inner vessel, exposing the running vessel.
5. Retrieve jammed items and replace inner vessel.
6. Screw hopper lid and push RUN/STOP button to start sorting again.
1. Gently tilt the machine to the side. The coins will fall out of the bottom of the
machine through the coin retrieval slot.
1. Make sure the front panel is completely opened flat.
10
Solutions

Capítulos

Tabla de contenido
loading

Tabla de contenido