Troubleshooting; Warranty Conditions; Declaration Of Conformity - Torqeedo 1979-00 Manual De Instrucciones

• Regularly check all cables for damage and signs of abrasion.
• Regularly check that contacts and screw connections are tight.
• Only clean the cables with a soft cloth and mild detergent that is suitable for plastics (e.g.
washing-up liquid). Do not use any chemicals or solvents for cleaning.

6. Troubleshooting

Fault
- System doesn't
start
- Display doesn't
turn on
- Error message:
Motor undervolt-
age
- Motor without
power supply
7. Disposal
Dispose of the product according to EU Directive 2012/19/EU (WEEE)
and national laws. Do not dispose of the product with household waste.

8. Warranty conditions

Warranty conditions and warranty certificate available at www.torqeedo.com.

9. Declaration of conformity

The EU declaration of conformity can be downloaded from www.torqeedo.com.
Torqeedo Service Partners worldwide
You can find contact details for all Torqeedo branches on the back of this manual.
Contact details for all service partners can be found under the
"Service Center" section of the partner search at www.torqeedo.com.
Possible cause
TorqLink supply cable fuse
defective
TorqLink cables faulty
TorqLink cable connections
faulty
Main switch
Fuse defective
Power cables faulty or defec-
tive.
Remedy
Check both fuses, replace if
necessary
Check TorqLink cables, start-
ing from the throttle
Check the TorqLink cable is
properly positioned
Check on-position of main
switch
Check fuses, replace if nec-
essary
Check installation of battery
bank and power cables
DE
EN
FR
IT
ES
PT
DA
NL
SV
FI
NO
11