Wall Mounting For Your Sound Bar - THOMSON SB100BT Instrucciones De Funcionamiento

B. Pairing with a Bluetooth stereo transmitter
Different Bluetooth transmitters have different pairing ways. Please refer to the user manual
of your Bluetooth transmitter for further information. The general pairing steps are as follows:
1. Keep SB100BT/SB200BT and Bluetooth transmitter within 1 meter when pairing.
2. Press , button, and press the SOURCE to select the Bluetooth mode.
3. Switch on your Bluetooth transmitter and let it enter pairing mode.
4. The transmitter will search and connect with SB100BT/SB200BT automatically. After
successful connecting, the Bluetooth voice will change when connected successfully.
Remarks : SB100BT/SB200BT will return to pairing mode automatically after disconnecting
from a Bluetooth device.
C. Music Playback
Connecting with a A2DP cell phone or Bluetooth transmitter.
1. Connect your cell phone or Bluetooth transmitter with SB100BT/SB200BT.
2. You can listen to your music from SB100BT/SB200BT now when playing it back.
3. Press Vol+ to turn up the volume, press Vol- to turn down the volume.
4. Press to skip to the previous song.
5. Press to skip to the next song.

Wall mounting for your sound bar

Please tear off the sticker, Use the wall attachment kit to mount your sound bar on the wall.
Wall attachment kit.
1. 2 wall brackets.
2. 8 attachment screws (for sound bar with bracket)
3. 8 EVA cover the screw
4. 2 lona screws
5. 2 wall anchors.
You will need :
1. Electric drill.
2. Screwdriver
3. Pencil
4. Spirit level
Note: Use the spirit level to ensure the wall mount plate are both horizontal.
1. Tear off the sticker on back plate, screw in the 4 screws with bracket to the sound bar,
and take the EVA cover the screws.
2. Mark the holes to be drilled.
3. Drill holes at the marketed points then insert the wall anchors.
4. Screw in the 2 screws to the wall, then attach the sound bar and make sure it is stable.
- EN 19 -