Idiomas disponibles
Idiomas disponibles
English
Note! Installation by a certified electrician is recommended.
• Find your main fuse or breaker box in
your home.
• Turn off and/or unscrew all fuses.
• Turn off all circuit breaker switches that
control power to the room in which you
are working.
• Turn any wall switches off. If any pull
chains or switches are on the fixture, turn
off.
Note! Do not damage any wire insulation
during installation. Ensure no rough or
sharp edges are in contact with any wires.
Mounting Instructions:
1. Confirm power is off.
2. Remove the screws(5) from the lamp body(C) and take
mounting bracket(B) down from lamp body(C).
3. Drill two holes at the proper location on the wall related
with the hole of mounting bracket(B) as right side picture.
4. Tap the anchors(3) into the two holes using a hammer.
5. Attach the mounting bracket(B) to the wall and fasten the screws(4) into two holes.
Screws(2) into the mounting bracket(B) and fasten the screws(2) into an electrical box(A).
6.
Make the wire connections:
1. Confirm power is off.
2. Connect the electrical box black wire to the black fixture wire with connector (1).
3. Connect the electrical box white wire to the white fixture wire with connector (1).
Connect the green/yellow grounding wire to the copper fixture wire with connector (1).
4.
Attach the lamp:
1. Attach the lamp body(C) to the mounting bracket(B) with the screws(5).
6 |
