Fontastic RAVE Manual Del Usuario página 2

GB
User Manual
Thank you for choosing this Fontastic
Please read this user manual carefully and comply with the safety instructions.
Package Contents
● 2 x wireless headset
● Storage and charging case
● USB Type-C™ cable
● 3 pairs of earbuds (small, medium & large)
● User manual
Overview:
Headset
1. Multifunction Button
2. Status LED
3. Volume -/ previous track
4. Volume +/ next track
1
5. Speaker/Earbud
6. Charging Pins
Charging case
7. Charging Staus Headsets
8. Charging Pins
9. Charging Status Case
10. USB Type-C Charging Port
(on the rear side)
Getting Started
Charging the headset
Insert the headset into the charging
case. Make sure that pins are well
connected. The LEDs (7) and (9)
will turn on and show charging status.
Charging the case
Connect the Type-C™ cable, included with the headset, to the charging case (10)
and to a power supply or USB port on a computer to charge the battery of the
case. During charging, the battery display on the case shows the battery status.
The headset display shows its current charge status.
Switching On/Off
Switch on: Hold the Multifunction button (1) for about 2-3 second.
Switch off: Hold the Multifunction button (1) for about 5-6 seconds.
Note: Both headsets switch on and off automatically when removed or inserted
into the case.
1
product.
®
3 4 5
2
right
10
9
8
Note: Rave has a voice announcement, this can be given in German (default)
or English.
Setting the language: Press the multifunction button (hold the button down for
about 15 seconds) until you hear the desired language setting, then release the
button.
Pairing
The RAVE Headset has to be paired with a Bluetooth
headsets LED will blink alternating between red and blue when it's ready to pair.
1. Take out the Headsets from the charging case. They will automatically power on
and pair with each other. Now one of them switches to pairing mode to connect
6
to the Phone.
2. Search for "RAVE" on your Bluetooth
with your device. When properly connected, the LED (2) blinks blue and turns off
after pairing has been sucessful.
Note:
- When set into the charging case the connection is disabled. When taken out of
the case they will automatically reconnect.
left
- If the headset cannot be connected within 3 minutes it will turn off on its own.
- If the connection is interrupted you have to press the Multifunction Button to
reconnect the headset.
Music Control
Play/Pause: Press the multifunction button once.
Skip Backwards: Short press Volume -/ previous track button (3).
Skip Forwards: Short press Volume +/ next track button (4).
7
Hands-free control
Answer/Hang up Call: Press the multifunction button once.
Decline Call: Hold the multifunction button (1) for a second when the call is
inbound.
Re-Dial: When in standby, press the multifunction button (1) 2 times. Your phone
will call the last dialled number.
Voice dial /Voice Command: When in standby, press and hold the multifunction
button (1) for 2 seconds. A „Bip" sounds and voice control is activated.
Volume setting
To increase the volume, press and hold the
until the desired volume is reached.
To decrease the volume, press and hold the
) until the desired volume is reached.
(3
Safety advice:
• Do not use the headset at high volume for prolonged periods of time.
• Be careful not to use headset in potentially dangerous situations.
device before use. The
®
device and select it to pair the headset
®
Volume +/ next track button (4
Volume -/ previous track button
GB
)
2