Press the button after pressing WEEK to turn the weekly timer ON or OFF.
Press the button to adjust the brightness.
Heating: Two settings. Press the button once for a low heat output. Press the
button twice for high heat output. Press the button again to turn off the heater.
The fan will continue to operate for 10 seconds and then turn off. Use the [+]
or [-] button to set the temperature between 15-30°C. The fan will continue to
work for 10 seconds and then turn off.
CLEANING AND CARE
Note: Turn off the unit and unplug it from the power outlet. Wait until the unit has
completely cooled down before cleaning it.
• Use a vacuum cleaner to clean the ventilation slots and grilles.
• Remove dust on the outside surfaces with a damp (not wet) cloth.
• Do not use strong cleaning agents or abrasives.
• Do not spray the device with liquids or immerse it in water or other liquids.
• Never open the heater housing.
Storage
Keep the unit in a dust-free place during the low season. Pack it in the original carton.
Wind the heater cable cleanly to avoid damaging the cable.
EN
21