INSTALLING YOUR LABMILL
A. Contents
LabMill
B. Unpacking
Keep the packaging, as the unit must be repacked
when transported.
CAUTION: The LabMill weighs over 200 kilograms.
Ensure that sufficient help is available to safely unpack
and move it.
1.
Open the door by releasing the two latches.
2.
Undo the strap to lower the access ramp.
3.
Lower the ramp.
4.
Undo the strap around the equipment.
5.
Release the brakes and roll the device out
of the crate. Remember this device is very heavy.
At least two people will be required.
6.
Remove the packing list from the crate.
C. Installation
Your LabMill must be installed by a CHOPIN Technologies technician.
The LabMill does not require air-conditioned premises, but the environmental conditions indicated in the user's manual must be respected.
• The LabMill must be placed on a flat, horizontal surface (maximum slope: 3°).
• Do not place your LabMill behind a window, especially if it is exposed to sunlight for several hours.
• Leave a gap of at least 20 centimeters around the LabMill to ensure proper ventilation.
D. Connecting the power
1.
Connect the power cable to the device.
2.
Plug the power cable into the main power
supply socket.
Power cable
USB stick with
user's manual
1000 g
Set of Allen
reference weight
1
4
1
Brush
Sifting
compartment
keys
safety key
2
5
2
3
6