Operation Warnings - Tripp-Lite DMTP55NO Manual Del Propietário

1. Important Safety Instructions
• If the power cord is damaged or feels hot, turn off the main power switch, allow the cord to cool and then unplug it.
• Ensure that all cords connected to the product are properly routed and secured to prevent tripping and entanglement
hazards.

1.3 Operation Warnings

• If the screen does not display an image after being turned on, unplug the AC input power cord and contact Tripp Lite for
service.
• If the product is dropped or damaged, unplug the AC input power cord and contact Tripp Lite for service.
• Do not touch the product with wet hands.
• Do not touch, push, rub or tap the screen surface with your fingernail or any object other than a fingertip or the included
touchscreen pen/stylus. Using a fingernail or other sharp object may damage the screen.
• Before cleaning the product, unplug the power cord. Wipe gently with a soft, dry cloth to prevent scratching.
• Do not use any chemicals, such as waxes, benzene, alcohol, glass cleaners, thinners, insecticides, air fresheners or
lubricants on the product, as these may damage the screen's finish and cause discoloration.
• Do not spray water or other liquids directly on or into the product. If liquid enters the product, it may result in fire, electric
shock, hardware damage or malfunction. Unplug the AC input power cord immediately.
• If a fixed image displays on the screen for a long period of time, it may become imprinted on the screen permanently. This
image burn-in is not covered by the product warranty. Avoid displaying fixed images for excessive periods (2+ hours), turn
off the screen when not in use and use the built-in screen saver to prevent image burn-in.
• When viewing the screen, take 5- to 15-minute breaks every hour. Viewing the screen for long periods without rest may
cause fatigue and eyestrain.
• Do not touch the ventilation openings. They may become hot when the product is in operation.
• If the product emits smoke or a burning smell, unplug the AC input power cord and contact Tripp Lite for service.
1.4 Remote Control Battery Warnings
• Use only the size and type of batteries specified.
• Follow the correct polarity when installing the batteries, as indicated in the battery compartment. Reversed batteries may
damage the remote control.
• Do not mix different battery types (e.g. Alkaline, Carbon-zinc or Rechargeable) or old and new batteries.
• If the remote control will not be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
• Do not try to recharge batteries that are not designed to be recharged; they may overheat and rupture.
• Use caution when inserting batteries to avoid battery damage and potential short circuits. Never use damaged batteries, as
they may overheat and cause device damage or injury.
• Do not expose batteries to excessive heat such as direct sunlight or fire.
1.5 Service Warnings
• There are no user-serviceable parts inside the display. To reduce the risk of electric shock, do not attempt to open or
remove any part of the display's enclosure for any reason, including the back cover. There are dangerous voltages inside
the product.
• If service is required, contact Tripp Lite at 773.869.1234 or tripplite.com/support. Service performed by non-authorized
personnel will void the product warranty.
3